George : Rounded Polygon (TVPA 8.6 & >)

Share your custom panels, brushes, papers... (you need to be registered to read posts in this section)
Post Reply
User avatar
Manuel
Posts: 673
Joined: 09 Feb 2006, 14:09
Location: France-Moselle

George : Rounded Polygon (TVPA 8.6 & >)

Post by Manuel » 28 Jun 2008, 18:21

Here are 3 scripts and a custom panel in a tvpx file.

Installation :
Copy the 3 scripts in your George folder.
Drop the tvpx file in TVPA (version 8.6 and above), it should install the custom panel.
For each action, assign a script :
1: PolyRounded.grg , it will draw a filled shape
2: PolyLineRounded.grg , it will draw with lines
3: PolyRoundedSet.grg, it asks you radius and level values

Use LMB to draw the lines, RMB for the last point.
If you want a corner NOT rounded, double-clic.
___________________________________________________________________________
Une série de 3 scripts qui vous permettront de dessiner facilement des polygones aux angles arrondis.

Installation
Copiez les scripts dans un dossier, installez le panneau personnalisé et refaites les assignations de chaque bouton.
1: PolyRounded.grg , dessine un polygone plein
2: PolyLineRounded.grg , pour un polygone creux
3: PolyRoundedSet.grg, pour définir la taille de l'arrondi, en pixels, et son niveau de fractionnement.

Bouton gauche pour pointer chaque sommet, double-clic pour un angle non-arrondi.
Bouton droit pour le dernier sommet.
Polyrounded.gif
You do not have the required permissions to view the files attached to this post.
Manuel

User avatar
Fabrice
Posts: 10079
Joined: 17 Jul 2007, 15:00
Contact:

Re: George : Rounded Polygon (TVPA 8.6 & >)

Post by Fabrice » 30 Jun 2008, 09:13

super cool, le truc ideal pour les BD et mangas :)
Fabrice Debarge

User avatar
Sierra Rose
Posts: 477
Joined: 04 May 2008, 17:14
Location: Windsor, California
Contact:

Re: George : Rounded Polygon (TVPA 8.6 & >)

Post by Sierra Rose » 01 Jul 2008, 15:25

Manuel, I got lost somewhere in this. I got the 3 files into the George folder. But where do I put the tvpx file? I tried putting it loose in the TVPaint Pro folder but it loads and when I say OK on the "Loading extension" folder it just disappears and doesn't load anything. I also have lost the ability to load the Creation Pack Trial since I got my new computer back and installed everything on it. I must be using the wrong folder?

EDIT: Nevermind on the Polygon one...I got it...but not the Creation Pack trial. Was there a time limit on that one?
WinXP 32bit 10.0.17Pro

User avatar
Sierra Rose
Posts: 477
Joined: 04 May 2008, 17:14
Location: Windsor, California
Contact:

Re: George : Rounded Polygon (TVPA 8.6 & >)

Post by Sierra Rose » 01 Jul 2008, 15:37

I'm sorry to bug you again...but the polyset one only gives me a filled rectangle with no rounded points.??
WinXP 32bit 10.0.17Pro

User avatar
Manuel
Posts: 673
Joined: 09 Feb 2006, 14:09
Location: France-Moselle

Re: George : Rounded Polygon (TVPA 8.6 & >)

Post by Manuel » 01 Jul 2008, 15:51

The PolyRoundedSet.grg script should only ask you 2 values. These values are used by the 2 other scripts.
It will draw nothing.

If you have just created a filled polygon before, TVP selects the fill rectangle tool when the script is done, I don't know why.
So it is only the rectangle tool that you are using, not the script.
Manuel

User avatar
Satrip
Posts: 109
Joined: 03 Aug 2007, 15:52
Location: France-85
Contact:

Re: George : Rounded Polygon (TVPA 8.6 & >)

Post by Satrip » 26 Mar 2009, 13:18

Hi,

Could it be possible to customize the PolylineRounded script to draw an unclosed line, not a closed polygon ?!
I've tried to do it myself with no success..
Help please :!:

PS: Very good scripts, congratulations to you Manuel!!! ^^

Post Reply